Low Cost Concentrated Detergent Powder Production Line
The production process can be semi-automatic or fully automatic.
Powder raw materials, such as soda ash, sodium sulfate, zeolite,
STPP and so on. The packing of material is small bags (25-50Kg).
These materials are measured by platform scale, unpacked and poured
into the feeding bin on the ground floor manually, and the raw
materials are lifted to the mixer by the lift.
Liquid raw materials, such as essence, nonionic, LABSA and so on,
the packing of material is barrel. These liquid materials are sent
to the respective liquid tanks by the barrel pump, and then
automatically measured by the respective metering pump and sent to
the mixer for internal atomization. The atomized liquid droplets
mix and react with the powder raw materials while stirring. After a
period of time, the powder and liquid are evenly mixed.
Open the discharge valve under the mixer, and send the material to
the screening machine for screening by the belt conveyor. The
concentrated powder that meets the particle requirements is lifted
from the lifting equipment to the finished product bin, and the
finished product bin is connected to the packing machine. The
semi-automatic packaging machine automatically weighs, the weighing
specification can be set according to the needs. Manually put the
bag, the packing machine feed the bag after induction. The
electronic platform scale recheck the weight, then seal the bag by
heat sealing machine. Check the sealing quality, then pack and
stack. Finally, send the finished product to the finished product
bin by small car.
Reasonable process, simple and reliable device and operation.